https://doi.org/10.1140/epjqt/s40507-023-00198-7
Research
Quantum scaling atomic superheterodyne receiver
1
State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Shanxi University, 030006, Taiyuan, Shanxi, China
2
Collaborative Innovation Center of Extreme Optics, Shanxi University, 030006, Taiyuan, Shanxi, China
3
State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, Haidian, 100084, Beijing, China
Received:
28
July
2023
Accepted:
20
September
2023
Published online:
3
October
2023
Measurement sensitivity is one of the critical indicators for Rydberg atomic radio receivers. This work quantitatively studies the relationship between the atomic superheterodyne receiver’s sensitivity and the number of atoms involved in the measurement. The atom number is changed by adjusting the length of the interaction area. The results show that for the ideal case where only interaction noise is present and the RF waves are uniformly distributed, the sensitivity of the atomic superheterodyne receiver exhibits a quantum scaling: the amplitude of its output signal is proportional to the atom number, and the amplitude of its read-out noise is proportional to the square root of the atom number. Hence, its sensitivity is inversely proportional to the square root of the atom number. This work also gives a detailed discussion of the properties of transit noise in atomic receivers and the influence of some non-ideal factors on sensitivity scaling. This work is significant in the field of atom-based quantum precision measurements.
Key words: Quantum sensing / Rydberg atom / Atomic superhet / Sensitivity
Peng Zhang and Mingyong Jing contributed equally to this work.
© The Author(s) 2023
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.